Jura Capresso IMPRESSA X7 - Manual (Page 11)

11
15.10 Machine scaled
Ⅲ : DECALCIFYING NECESSARY
The machine recognises the necessity of de-scaling. You can con-
tinue to draw off coffee or hot water/steam. We recommend that
you carry out the de-scaling (Chapter 19) within the next few days.
15.11 Clean contacts
Ⅲ : EMPTY DRIP TRAY / CLEAN CONTACTS
The de-scaling residue in the area of the contacts must be removed.
Please proceed as follows:
Ⅲ Rinse the contact fasteners in trough (B) (Fig. 8) as well as the
contacts (A) with hot water and washing-up liquid. Then ad-
ditionally clean the contact fasteners in trough (B) with a brush.
15.12 General cleaning instructions
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine.
Ⅲ Wipe off the inside and outside of the casing with a soft, damp
cloth.
Ⅲ Clean the pivoting nozzle after every use.
Ⅲ After heating milk, draw off a little hot water, in order to clean
the pivoting nozzle from the inside.
Ⅲ The water tank must be rinsed and filled with fresh water every
day.
If you see any visible scaling in the water tank, you can
remove it with a customary de-scaling agent.
Remove the water tank in order to clean it.
16. Cappuccino cleaning
Carry out this cleaning every day.
Once the cleaning sequence has started, it must not be interrupted.
It takes about 5 min.
Ⅲ Switch the machine on with the ON/OFF
switch.
Ⅲ Press the key until an acoustic signal is heard.
Ⅲ : SELECT
CLEANING – +
Ⅲ Press the key .
Ⅲ : CAPPUCCINO CLEANING
Ⅲ Press the key again.
Ⅲ : CLEANER FOR CAPPUCCINO /
PRESS CLEANING
Place a vessel of at least 0.5 l under the coffee spout (4).
Ⅲ Fill a vessel with about 0.25 litres of fresh water and add about 3
capfuls of the Cappuccino cleaner. Immerse the cappuccino tube
into it.
Ⅲ Press the key .
Ⅲ : CAPPUCCINO CLEANING / PLEASE WAIT
Ⅲ An acoustic signal is heard.
Ⅲ
: WATER FOR CAPPUCCINO / PRESS CLEAN
Fill a vessel with fresh water and immerse the cappuccino
tube into it.
Ⅲ Press the key .
Ⅲ : CAPPUCCINO CLEANING / PLEASE WAIT
+
17. Combined cleaning
Once the cleaning sequence has started, it must not be interrupted.
It takes about 20 min.
Ⅲ Switch the machine on with the ON/OFF
switch.
Ⅲ Press the key until an acoustic signal is heard.
Ⅲ : SELECT
CLEANING – +
Ⅲ Press the key 2x.
Ⅲ : ENTIRE CLEANING
Ⅲ Press the key .
Ⅲ : EMPTY DRAWER / INSERT
TABLET (Fig. 10) /
CLEANER FOR CAPPUCCINO
Ⅲ Place a sufficiently large vessel under the coffee spout .
Ⅲ Fill a vessel with about 0.25 litres of fresh water and add about
3 capfuls of the Cappuccino cleaner. Immerse the cappuccino
tube into it.
Ⅲ Press the key .
Ⅲ : ENTIRE CLEANING / PLEASE WAIT
Ⅲ : WATER FOR CAPPUCCINO / PRESS CLEAN
Fill a vessel with fresh water and immerse the cappuccino
tube into it.
Ⅲ Press the key .
Ⅲ : COMBI CLEANING / PLEASE WAIT
Ⅲ : EMPTY DRAWER
18. Coffee cleaning
Once the cleaning sequence has started, it must not be interrupted.
It takes about 15 min.
Ⅲ Switch the machine on with the ON/OFF
switch.
Ⅲ Press the key until an acoustic signal is heard.
Ⅲ : SELECT
CLEANING – +
Ⅲ Press the key 3x.
Ⅲ : COFFEE CLEANING
Ⅲ Press the key
Ⅲ
: EMPTY DRAWER / INSERT TABLET
(Fig. 10) /
PRESS CLEANING
Ⅲ Place a sufficiently large vessel under the coffee spout (4).
Ⅲ Press the key
Ⅲ
: COFFEE CLEANING/ PLEASE WAIT
Ⅲ : EMPTY DRAWER
19. Descaling
The machine has an integrated descaling programme. The process
takes about 40 min.
Once the descaling process has started, it must not be inter-
rupted
If you use descaling agents containing acid, remove any splashes
and drips on sensitive surfaces, in particular natural stone and
wood surfaces, straight away or take corresponding safety pre-
cautions.
Ⅲ Switch the machine off with the ON/OFF switch.
Ⅲ Press the key until an acoustic signal is heard.
Ⅲ
: EMPTY DRIP TRAY
Ⅲ : INSERT AGENT IN TANK / PRESS
DECALCIFYING
Dissolve 3 tablets completely in 0.7 litres of water in a vessel
and pour the mixture into the empty water tank.
+
+
E