Jacuzzi Amiga 9180 - Manual (Page 2)

Amiga™ Whirlpool Bath
Model: N890, N888
Amiga™ Bath
Model: 9180
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
N890 Amiga™ Whirlpool Bath
Right Hand
N888 Amiga™ Whirlpool Bath
Left Hand
9180 Amiga™ Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
2 x BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 36” W x 20-3/4” H
(1829) mm L x (914) mm W x (533) mm H
Drain/Overflow
A: 16-7/8” (429 mm) B: 14” (356 mm)
Cutout
70” x 34”
Total Weight
N890, N888: 772 lb. (351 kg) / 43 lb/sq. ft. (209 kg/m 2 )
9180: 738 lb. (335 kg) / 41 lb/sq. ft. (200 kg/m 2 )
Operating Gallonage
50 U.S. Gal. (186 Liters)
Product Weight
N890, N888: 105 lb. (48 kg)
9180: 71 lb. (32 kg)
Skirt Mounting
Optional U-Frame
Electrical Specifications Models N890, N888 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models N890, N888 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
72''
18''
36''
2''
16'' x 4''*
14''
Opt. Service
Access
12" H x 18"
L
Service Access
Motor
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR07 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Amiga™ Whirlpool Bath Left Hand Shown Model: N888
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.