beautypg.com

Speaker connection, Speaker placement (cont.), See operation manual – JBL 120V User Manual

Page 5: Voir le cahier d indtruction

background image

Speaker Connection

2

ESC230
Surround Processor/Amplifier
JBL Incorporated. Northridge. California. USA

LEFT

RIGHT

SUB

FRONT

REAR

CENTER

6 CHANNEL INPUT

Manufactured under license from Dolby Laboratiories Licensing Corporation

"Dolby", the double-D symbol and "Pro Logic" are trademarks of

Dolby Laboratories Licensing Corporation.

_

_

_

_

_

_

+

+

+

+

+

+

RIGHT

RIGHT

RIGHT

LEFT

LEFT

LEFT

SPEAKER IMPEDANCE: 8

FRONT SPEAKERS

REAR SPEAKERS

RIGHT

RIGHT

LEFT

LEFT

DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE FUSE.

CAUTION:

DEBRANCHER AVANT DE REMPLACER LE FUSIBLE. UTILIZER UN FUSIBLE DE
RECHANGE DE MEME TYPE.

ATTENTION:

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS:

RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

SUBWOOFER

CENTER

SPEAKER

F 1.6A

CAUTION:

SEE OPERATION MANUAL

ATTENTION:

VOIR LE CAHIER D INDTRUCTION

MODEL

: ESC230

AC SUPPLY

: 120VAC / 60HZ~

INPUT POWER

: 140 Watts

FUSE

: F 1.6A

INPUT 1

INPUT 2

OUTPUT 1/2

+

+

+

+

+

+

Front Right Speaker

Rear Right Speaker

Rear Left Speaker

Front Left Speaker

Center Speaker

Subwoofer

To connect your speakers,
press down on the quick-
release tab, which opens
the terminal for the speaker
wire, and put the bare end
of the wire in straight.
Release the tab and give

the speaker wire a gentle
tug. If it’s in properly, it
won’t “give” at all. If it
slides, repeat the procedure.
Use the shortest wire for the
CENTER speaker, the two
medium-length wires for the

FRONT speakers and the
long wires for the REAR
speakers.

Always insert the RED-
coated wire into the RED
terminals and the BLACK-
coated wire into the

BLACK terminals on each of
your speakers and on the
appropriate terminal on the
back of the Main Unit.

+

+

+

Back of Speaker

Red Black

Make sure you match

RED to RED and BLACK

to BLACK on both ends.

On optional
stands.
Part No.
FS10/20.

Rotating logo.
Pull out gently and turn.

Subwoofer

The subwoofer should be placed
along the front wall. Bass output
will increase as the subwoofer is
moved closer to a corner.

Speaker Placement (Cont.)

1

6