Connecting/ using a decoder – JVC HR-E249E User Manual

Page 33

The AV2 IN/DECODER connector can be used as an input
terminal for an external decoder (descrambler). Simply connect
a decoder and you can enjoy the variety of programming that is
available through scrambled channels.

SELECT INPUT MODE

Set "AV2 SELECT" to "DECODER". (

੬

pg. 30)

CONNECT DECODER

Connect your recorder's AV2 IN/DECODER connector
to the decoder's Euroconnector using a 21-pin SCART
cable.

SET TUNER

Perform the procedure as described in "When Receiv-
ing A Scrambled Broadcast" on page 38.

NOTE:

When Connecting A Satellite Tuner . . .
. . . if you don't have a decoder connect the satellite tuner
directly to the video recorder's AV2 IN/DECODER connector.
. . . if you have a decoder, first connect the decoder to the
decoder input of the satellite tuner, then connect the satellite
tuner's output to the recorder's AV2 IN/DECODER connector.
Refer to the instruction book for the satellite tuner and decoder.
. . . set "AV2 SELECT" to "AV2". (

੬

pg. 30)

. . . to view a programme via the satellite tuner, select AU 2
mode by pressing NUMBER keys and/or TV PROG. so that
"AU-2" appears on the display panel.

SYSTEM CONNECTIONS

Connecting/

Using A

Decoder

TV Aerial
Cable

AV1 IN/OUT

AV2 IN/DECODER

RF Cable (provided)

TV Receiver

Rear View

Satellite
antenna

Satellite tuner

Decoder