Jacuzzi Neo Angle Shower System - Manual (Page 2)

INSTALLATION INSTRUCTIONS
Important: Read complete instructions before beginning installation.
Review instructions for all optional items being considered for installation before completing rough-in. The
successful installation of the options may require some modifications to be made to the custom shower system
or the rough-in structure before completion.
Check for shipping damage upon receipt of the custom shower system. Jacuzzi Whirlpool Bath is not responsible for
damage sustained during shipping. If damage is evident before unpacking, see instructions regarding shipping claims
on the outside of the carton and immediately file a claim with the carrier.
Once the components have been removed from the carton and before it is permanently installed, check the parts
completely for damage resulting from shipping or handling. All Jacuzzi Whirlpool Bath products are factory tested for fit
and finish prior to shipping. If problems are detected, immediately notify your Jacuzzi Whirlpool Bath dealer or Authorized
Service Agent, or call Jacuzzi Whirlpool Bath, (800) 288-4002, for Warranty Service.
NOTE: Damage or defects which could have been discovered and repaired prior to installation and which are
claimed after final installation of the shower system are excluded from our warranty.
ROUGH-IN DIMENSION CHART
MODEL A B C D E F
STEP 1. ROUGH-IN FRAMING DETAILS
4242N 42-1/8" 42-1/8" 16" 16" 27" 12-3/8"
4848N 48-1/2" 48-1/8" 16" 16" 32-1/4" 16-3/8"
SHOWN AS A RIGHT HAND SEAT WALL
E
B
D
A
F
C
L
C
SHOWN WITH 2 SHELF WALLS
E
B
D
A
F
C
CROSS
SUPPORT
L
C
E
L
C
L
C
E