Jwin JX-43000D - Manual (Page 12)

11
RECORDING
Recording copyright material without permission
of the copyright owners is usually an infringement.
If
you wi sh to record copyright material,
permission from the copyright owner is necessary.
jWIN does not approve of, and cannot be held
responsible for, any unlawful use of this machine.
1. Load a blank cassette.
2. Select
CD function.
3. Load the disc to be recorded.
- Select the track number if required.
- For programmed recording, programme
the material in advance (as described
under
PROGRAMMED PLAY ).
- Press CD PLAY button.
4. Press the REC button. The PLAY button is
engaged simultaneously and CD recording
starts.
5. Press the STOP/EJECT button to stop
recording.
1. Load a blank cassette.
2. Tune in the radio station to be recorded.
3. Press the REC button to start recording.
4. Press the STOP/EJECT button to stop
recording.
Beat (a high pitched noise) may sometimes be
heard during the recording of radio broadcasts.If
this occurs, set the BEAT CANCEL switch to the
position that reduces the level of the beat noise.
To protect side A, break out tab (1).To protect side
B, break out tab (2) (Fig.8).
To erase or record a protected cassette,
cover the tab openings with adhesive tape
(3).
Note:
The REC button cannot be depressed when using
a protected cassette.
Re cording com pact discs
Recording from the radio
When beat is heard
Safeguards against accidental erasure
Cleaning the tape heads
To ensure continued high performance , use a
cleaning tape (available f rom your local audio
dealer) to clean the head block of the deck after
about every 10 hours of use
MAINTENANCE
Cleaning the unit
Clean the outside of the unit with a clean soft cloth,
mois tened with lukewarm water. Do not use
benzene, thinner, or alcohol since they will mar
the finish of the surfaces.
Cleaning the CD player lens
The lens should never be touched. If dust is on the
lens, blow it off using a camera lens blower. (Fig.
9). (Consult your dealer.)