Jensen JDTV-750 User Manual
Page 15
JDTV-750 User Manual, page 14
Note: When the unit is in mute mode, pressing VOL+ button will switch on the sound and
turn it up, pressing VOL- button will switch on the sound and turn down the sound.
PICTURE MODE
Press PICTURE button to enter picture mode.
Keep pressing this button to scroll through the different
modes available.
Picture modes available are Standard, Dynamic, Soft and
Personal.
MTS (SOUND TRACK) MODE
This is used to change the audio output language.
Press MTS button to enter audio language selection
mode :
Press i or j buttons on the remote to select a different
audio language supplied by the signal provider (not
available in all channels)
TIMER SETTING
The TV will go into standby mode automatically after the
period of time you select.
Press the SLEEP button on the remote and the Sleep
Timer will appear on the screen.
Keep pressing the SLEEP button to select different time.
The sleep time can be set to one of the following times,
Off/5/10/15/30/45/60/90/120/180/240 Min.
ZOOM
It is used to change the screen aspect ratio.
Press the ZOOM button to change the display mode.
The display proportion can be adjusted between Wide (16:9) and Normal (4:3) mode.
INFO (INFORMATION)
This is used to display current program information.
Press INFO button, the screen will display as below: