Jacuzzi Elara GA60 - Manual (Page 2)

Elara
™
6636
purE air® Bath
technical Specifications
DimEnSionS
66” L x 36” W x 26” H
(1676) mm L x (914) mm W x (660) mm H
Drain/ovErflow
A: 18-1/2” (470 mm) B: 10.6” (269 mm)
Cutout
64” x 34” & undermount template DQ51000
total wEight
1039 lb. (471 kg) / 63 lb/ft
2 (308 kg/m 2 )
opErating gallonagE
Min 46 U.S. Gal. (174 liters)
Max 83 U.S. Gal. (314 liters)
proDuCt wEight
200 lb (91 kg)
Skirt mounting
Not Available
ElECtriCal SpECifiCationS
requires a dedicated gfCi protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
hEatEr (StanDarD)
No water heater is available on this unit. Blower has integral air heater.
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation notES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#GD82000 01/08
ga50 Elara™ 6636 Pure Air® Bath, Left Hand
ga60 Elara™ 6636 Pure Air® Bath, Right Hand
• Right and Left Hand Drain Location
• Accessories / Hardware:
Sch 40, Rotoary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
DRAIN/OVERFLOW
A
B
product Shown: Elara™ 6636 pure air®
left hand model: ga50
* Measurements inside unit represent cutout
in floor to allow for drain/overflow.
END VIEW
H
W
SIDE VIEW
L
1/2"
(13 mm)
(Blower)
66"
36"
18 "
4.2"
9.6"
12" x 4"
Opt. Service
Access
12" H x 24" L
Service Access
2"
Blower
Elara™ 6636,
Left Hand