beautypg.com

Using the surround processor, English – JVC AX-V5BK User Manual

Page 22

background image

English

Page 17

Using the Surround Processor

The built-in surround processor provides three types of surround programs — Dolby Pro Logic, Dolby 3-
Channel Logic, and JVC’s Hall Surround.

What is surround?

The sound heard in a concert hall or a movie theater consists of direct sound and indirect sound: early
reflections and reflections from behind. The reflected sounds are always delayed by the distances of the ceiling
and walls from the listener. These reflections are some of the most important elements of the acoustic
surround.

On JVC’s Hall Surround

In order to reproduce a more realistic sound field in your listening
room while playing an ordinary stereo source, JVC’s Hall Surround
has been designed to give you clear vocals and to create the
feeling of a concert hall. The sound is reproduced through the
front speakers and rear speakers.

On Dolby Surround

Dolby Surround has been also developed to reproduce the
important elements of the acoustic surround at home.
To watch the soundtracks of video software bearing the mark

DOLBY SURROUND

* which includes the same encoded surround

information as found in Dolby Stereo films, the amplifier can
provide you with 2 Dolby Surround programs (Dolby Pro Logic
and Dolby 3ch Logic).
Dolby Pro Logic: Select this mode when the optional rear
speakers are connected (as well as a center speaker).
Dolby 3ch Logic: Select this mode when a center speaker is
connected without rear speakers.

Notes:
• The surround processor has no effect on monaural sources.
• The surround processor cannot be used for recording.

Early reflections

Reflections

from behind

Direct sound

Using JVC’s Hall Surround

You need to connect one set of rear speakers to obtain the full effect.
Once you have adjusted the Hall Surround, the amplifier memorizes the settings.

On the front panel:

1. Press SURROUND so that the Control

%

%

%

%

% / fi

fi

fi

fi

fi / @

@

@

@

@ / #

#

#

#

# buttons work for selecting the surround

modes.
The lamp above the button lights up.

2. Press Control

%

%

%

%

% / fi

fi

fi

fi

fi until “HALL” appears on the display.

The HALL indicator also lights up on the display.
Each time you press the button, the surround modes change as follows:

The indicator of the selected surround mode lights up in turn as you select the surround modes.

SURROUND

PROLOGIC

3CHLOGIC

HALL

OFF

* Manufactured under license from Dolby Laboratories Licensing

Corporation. “Dolby,” the double-D symbol, and “Pro Logic” are
trademarks of Dolby Laboratories Licensing Corporation.

AX-V5BK(EF)_0023-001A_En

97.4.24, 1:15 PM

17