JVC 0802MWMMDWJEM - Manual (Page 25)

– 22 –
To check the program contents
Before playing, you can check the program contents by
pressing
¢ or 4.
•
¢: Shows the programed tracks in the programed
order.
•
4: Shows them in the reverse order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL on the remote control. Each time you
press the button, the last programed track is erased from the
program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
To erase the entire program, press CD
0 to eject the disc.
• Turning off the unit will also erase the program.
If your entry is ignored
You have tried to program a track number that does not exist on the
disc (for example, selecting track 14 on a disc that only has 12
tracks). Such entries are ignored.
If you try to program a 33rd step
“MEMORY FULL” will appear in the main display.
If the total playing time is 100 minutes or more
The total playing time will not be shown. (“– – : – –” will appear.)
Playing at Random—Random Play
The tracks of a loaded disc will play at random.
On the remote control ONLY:
1
Load a disc.
2
Press CD 3/8, then 7.
The source is changed to “CD.”
3
Press PLAY MODE repeatedly so that “CD
RANDOM” appears in the main display.
The RANDOM indicator lights up on the display.
• Each time you press the button, play mode changes
as follows:
4
Press CD
3/8.
The tracks are played at random.
Random play ends when all the tracks are played once.
To skip the current track, press ¢.
• You cannot go back to the previous tracks by pressing
4.
To stop during playback, press 7.
To exit from Random play mode, press PLAY MODE
once or twice so that the unit enters another playback mode
(Normal play or Program play mode) before or after play.
Repeating Tracks—Repeat Play
You can have all the tracks, the program or the individual
track currently playing repeat as many times as you like.
On the remote control ONLY:
To repeat play, press REPEAT during or before play.
• Each time you press the button, Repeat play mode
changes as follows:
“CD REPEAT ALL”:
Repeats all the tracks on the disc (in Normal play or
Random play mode), or all the tracks in the program.
The
indicator lights up on the display.
“CD REPEAT 1”:
Repeats one track.
The indicator lights up on the display.
“CD REPEAT OFF”:
Cancels the repeat play.
• Ejecting the disc or turning off the unit will also cancel
the repeat play.
To stop during play, press
7.
To prohibit disc ejection—Disc Lock
You can prohibit disc and MD ejection from the unit,
and can lock the discs.
See “To prohibit disc ejection—Disc Lock” on page 25
for details.
CD REPEAT ALL CD REPEAT 1
CD REPEAT OFF
(canceled)
CD PROGRAM CD RANDOM
Normal play
EN19-22UX-Z7MD[A]f 02.7.31, 21:23 22