JVC GET0201-001A - Manual (Page 23)

23
ENGLISH
Changing the display pattern
By pressing D DISP, you can change the information shown on the display.
If the information cannot be shown at a time, it will scroll on the display. See also “To
select the scroll mode—Scroll” on page 38.
Some characters or symbols will not be shown (will be blanked or substituted) on the
display.
Each time you press the button, the display patterns change as follows:
Clock time
Original display
Clock
Notes:
• When the disc title/performer is shown, the
(disc) indicator lights up. When the track title is
shown, the
(track) indicator lights up.
• If no name is assigned to the audio CD, “NO
NAME” will appear. To assign a name to an audio
CD, see page 43.
• If no disc title/performer or no track title is
recorded for the CD Text, “NO NAME” will appear.
Clock time
Current track
number Track name
Original display
Clock
Notes:
• When the folder name is shown, the (folder)
indicator lights up. When the track name is shown,
the
(track) indicator lights up.
• If “Tag” is set to “On” (see page 38), ID3 tag
information will appear on the display if the disc
has an ID3 tag.
The album name/performer with
(disc)
indicator appear on the display instead of the folder
name; while track title with
(track) indicator
appear instead of the track name.
While playing an MP3 or a WMA disc when
“Tag” is set to “Off”: While playing an audio CD or a CD Text disc:
EN15-23_KD-AR3000LH300[J]f.p65 20/11/03, 4:14 PM 23