JVC HR-J4009UM - Manual (Page 5)

〈 +/—/ENTER/MENU 〉
MENU
CLOCK SET
TIMER REC SET
ON OFF AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
Set VCR channel
To view playback of a recorded tape, or to watch a program
selected by the VCR's channel selector, the TV must be set to
channel 3 or 4 (video channel) when a TV is connected with
the 75 ohm coaxial cable only.
Set the 3/4 Channel selector switch (Rear of the VCR) to
CH 3 or 4.
Turn ON the TV and set to CH 3 or 4 to correspond with
the channel selected in 1.
Press POWER to turn on the VCR.
The POWER indicator will light.
Press TV/VCR to select the VCR
position.
The TV/VCR indicator will light.
Select any channel to receive a
TV station in your area.
The channel number will appear
on the screen for about 4 seconds.
CAN 125
4
Language Setting
The default setting is “ESPAÑOL”.
Access Menu screen, then
Language screen
Press MENU on the Remote. Press
SET –/+
to select “LANGUAGE”, then
press ENTER.
Select language
This VCR offers you the language
choice to view menus and some
messages — in English, Spanish or
French. Press SET –/+ to select your desired language, then
press ENTER.
Press MENU twice to return to normal screen.
〈 +/–/ENTER/MENU 〉
LANGUAGE/IDIOMA/LANGUE
ENGLISH
FRANCAIS
ESPAÑOL
〈 +/—/ENTER/MENU 〉
MENU
CLOCK SET
TIMER REC SET
ON OFF AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
1
2
3
4
Initial Settings
Clock Setting
Access Menu screen, then Clock
Set screen
Press MENU on the Remote. Press
SET –/+
to select “CLOCK SET”, then
press ENTER.
MONTH
DAY
TIME
YEAR
3
1
12
(WED)
: 00 AM
2000
〈 +/—/ENTER/CANCEL/MENU 〉
3
26
8
(TUE)
: 30 AM
2002
MONTH
DAY
TIME
YEAR
〈 +/—/ENTER/CANCEL/MENU 〉
Set month, day, year and time
Press SET –/+ until the desired month
appears, then press ENTER. Set the
day, year and time in the same way.
Start clock
Press MENU twice and normal screen
appears.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change
blinks, then press SET –/+.
Preparations
1
2
3
– Connections and VCR channel Setting –
You must set the date and time for timer recording.
NOTE:
After a power failure or disconnection of the power over 18
hours, the timer settings will be lost. In this case, reset the
present time.
1
2
5
4F11501AE Cov-07 16/01/2002, 18:24 5