JVC CA-MXG500 - Manual (Page 20)

– 17 –
Recording a Tape on Deck B
On the unit ONLY:
1
Press EJECT
0 for deck B.
2
Put in a recordable cassette, with the exposed
part of the tape down and the side you want
to record facing front.
3
Close the cassette holder gently.
4
Start playing the source—FM, AM, CD
player or auxiliary equipment connected to
AUX IN jacks.
• For duplicating tapes, see “Dubbing Tapes” on page 18.
• For recording from CD, see “CD Synchronized
Recording” on page 18.
5
Press REC START/STOP.
The REC (recording) indicator lights up on the
display and recording starts.
To stop during recording, press REC START/STOP again
or
7.
To remove the cassette, press EJECT 0 for deck B.
Recording
IMPORTANT:
• It should be noted that it may be unlawful to re-
record pre-recorded tapes, records, or discs without
the consent of the owner of copyright in the sound or
video recording, broadcast or cable program and in
any literary, dramatic, musical, or artistic embodied
therein.
• The recording level is automatically set correctly, so it
is not affected by the VOLUME control and the
SUBWOOFER LEVEL control. Thus, during recording
you can adjust the sound you are actually listening to
without affecting the recording level.
• While recording, you can hear sound modes through the
speakers or headphones. However, the sound is
recorded without these effects (see page 10).
• If recordings you have made have excessive noise or
static, the unit may be too close to a TV. Place the unit
away from the TV.
• You can use type I tape for recording.
To protect your recording
Cassettes have two small tabs
on the back to protect
unexpected erasure or re-
recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
To keep the best recording and playback sound
quality
If the heads, capstans, and pinch rollers of the cassette
decks become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
• Incomplete erasure
• Difficulty in recording
To clean the head, capstan, and pinch roller
Use a cotton swab moistened with alcohol.
To demagnetize the head
Turn off the unit, and use a head demagnetizer (available
at electronics and audio shops).
Head
Capstan
Pinch roller
Erase head
REC START
/STOP
CD
ST
EN17-24.MX-GT700&G500[J]_f 02.1.16, 9:03 PM 17