beautypg.com

English types of cassette tapes, Handling cassette tapes – JVC AX-UXG66 User Manual

Page 35

background image

30

English

Types of Cassette Tapes

This cassette deck unit incorporates an Automatic Tape
Detection function. This mechanism uses the tape-type
detection holes to distinguishes which type of tape was
inserted, and sets the bias and equalizer to the optimum
settings for that tape automatically.
The following types of tapes may be used with this cassette
deck unit.

Normal tape

TYPE I

BIAS:

NORMAL

EQ:

120µs

High position (CrO

2

) tape

TYPE II

BIAS:

HIGH

EQ:

70µs

Metal tape

(only for playback)

TYPE IV

BIAS:

METAL

EQ:

70µs

• Certain early period Metal and High position

(CrO

2

) tapes may not have tape-type detection

slots. The cassette deck unit cannot obtain the
correct characteristics for these tapes.

• Ferrochromite (FeCr) TYPE III tapes cannot be

used with this cassette deck unit.

Normal (No detection slots) Tab

(to prevent accidental erasure)

High position
detection slots

Metal detection slots

Handling Cassette Tapes

Cautions regarding handling

• Do not touch the surface of the tape or pull the tape out of

the cassette.

• Tape spooled loosely around the hubs is likely to jam in

the pinch rollers and capstans. Before loading the tape
into the cassette tray, take up the slack in the tape as shown
below.

Tape storage

• Place tapes in their cases for storage.
• Avoid storing tapes on top of TVs or speakers, in sunlight

or places of high temperature, or in humid or dusty areas.

To prevent accidental erasure

• Cassette tapes have tabs to prevent accidental erasure.
• If you remove the tabs after making a recording, the

cassette deck cannot be set to record when that tape is
loaded. Remove the t abs so that valuable
recordi ngs wi ll not be accidental ly erased.

Recording (erasure) is not possible when the tabs are
removed.

• To make another recording on a tape whose tabs have

been removed, cover the tab holes with adhesive tape.

DO NOT cover the tape-type detection slots.

For front side (A)

For reverse side (B)

Tape-type detection slot

Adhesive tape

EN29-32.UX-G66[US]f

12/11/00, 11:56 AM

30

This manual is related to the following products: