Jura Capresso S95 - Manual (Page 18)

18
Run the decalcifying program only after the machine has
been switched off for at least 5 hours and has cooled down
completely. The running decalcifying program must not be
interrupted.
If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especi-
ally natural stone and wooden surfaces, or take correspond-
ing precautions.
In any case please wait until the filled decalcifying agent is
used up and the tank is empty. Never top up the decalcifying
agent.
Ⅲ Remove and empty water tank.
Ⅲ Replace empty water tank.
Ⅲ Switch off your machine by pressing ON/OFF
key and let it
cool down for approx. 5 hours.
Ⅲ Open cover (3).
Ⅲ Press key until you can hear an acoustic signal.
Ⅲ
EMPTY TRAY
Ⅲ AGENT IN TANK
Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank.
Ⅲ AGENT IN TANK / OPEN TAP / PRESS CALC
Place a sufficiently large container under the pivoting nozzle
(20). Remove the Auto-Cappuccino.
Ⅲ Turn selector switch for coffee (19) to the symbol and press
key .
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).
Ⅲ PRESS CALC
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ CLOSE TAP
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ Inside the machine the decalcifying agent is conducted to the
drip tray.
Ⅲ EMPTY TRAY
Ⅲ FILL WATER
Ⅲ Place a container under the pivoting nozzle (20).
Ⅲ
OPEN TAP
Ⅲ PRESS CALC
Ⅲ UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Place a container under the height-adjustable tea-spout (22).
Ⅲ
PRESS CALC
Ⅲ UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ CLOSE TAP
Ⅲ UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Inside the machine the water is conducted to the drip tray.
Ⅲ
CLEAN CONTACTS / EMPTY TRAY
(please refer to chapter 13.8)
Ⅲ PLEASE WAIT
Ⅲ RINSE UNIT
Ⅲ UNIT RINSING
Ⅲ COFFEE READY