JVC TU-DB1SK - Manual (Page 14)

- 13 -
SYSTEM
Use LEFT/RIGHT buttons to toggle System Menu
Language. Press OK on the preferred language.
COUNTRY
Use LEFT/RIGHT buttons to toggle Country
options. Press OK on the preferred Country.
Audio Language
Digital terrestrial television channels can broadcast
simultaneous soundtracks in more than one
language. This function selects which language
soundtrack you will hear when switching to a channel
broadcasting with multiple soundtracks. See also
Section 2 - EVERYDAY OPERATION - Audio
Control.
Highlight the Audio Language line in the
Configuration menu and use the [LEFT] or [RIGHT]
keys to cycle through the language options of
English, Welish or Gari.
Return No Menu to normal TV viewing by pressing
the [MENU] key.
Subtitle Language
Digital terrestrial television channels can broadcast
with subtitles displayed on-screen for the hard-of-
hearing. This function selects the desired subtitle
language and enables the automatic display of
subtitles whenever subtitle information is broadcast.
Highlight the Subtitle line in the Configuration menu
and use the [LEFT] or [RIGHT] keys to cycle
through three language options of English, Welish
or Garic.
Return NO MENU to normal TV viewing by pressing
the [MENU] key.
TV TYPE
Digital terrestrial television channels can broadcast
programmes in a widescreen format which must be
output differently to normal and widescreen TV sets.
This function tells the receiver the screen format of
the TV connected so that broadcasts are displayed
correctly.
Highlight the TV Type line in the Configuration menu
and use the [LEFT] or [RIGHT] keys to select 4:3
if you have a standard TV set connected or 16:9 if
it is a widescreen TV. This function duplicates the
selection made at the time of first installation (see
1 - PREPARATION - Tuning In) and can be used if
you change TV sets.Return to normal TV viewing by
pressing the [MENU] key.
TV OUT
The receiver can output either an RGB/Y/C,Video
signal from the TV SCART on the rear panel.
Although the RGB format results in a better quality
picture, not all equipment - particularly some VCRs
- can cope with an RGB signal (see Appendix C -
Connecting A VCR).
Enter PIN code:
Use UP / DOWN buttons to go to Enter PIN code
option. Use OK button to enter new password. New
Password Menu is displayed. Use NUMBER buttons
to enter new password. New Password is asked twice
for confirmation.
EDITING THE CHANNEL LIST
The digital terrestrial television channels found by
the receiver when first installed are storedin its
memory as a channel list. This list can be altered
and amended to remove unwanted channels and to
suit your own preferences.
First bring up the Main Menu with the [MENU] key
on the remote control handset. Then, using the [UP]
or [DOWN] keys on the remote control, choose the
Edit PR list and press the [OK] key, to display the
Channel List.
The Channel List screen displays the list of
channels in the receiver's memory, with a quarter-
screen image window showing the selected channel,
and can be used to change channels for viewing,
delete channels from the memory, edit the name of
the channel as it appears in the list and on-screen,
lock a channel against viewing by younger members
of the family, and set up favourite channels.
Channel List functions are carried out on one
channel at a time. The channel to be affected is first
highlighted in the list using the [UP] or [DOWN]
keys.