JetAudio iAUDIO U2 - Manual (Page 14)

iAUDIO U2
14
If iAUDIO was ON when the AC adapter is con-
nected, the icon is shown on the LCD during
the charging and it changes to the icon after the
charge is completed. To play music while charging,
press and hold PLAY.
Charging iAUDIO / Connecting USB Cable
Connecting USB
Open the USB cover at the buttom of the iAUDIO,
then connect the USB cable from the PC to the USB
port of iAUDIO as in the figure on the left.
iAUDIO is charged when it is connected to PC.
The icon is shown on the LCD during the charg-
ing and it changes to the icon after the charge is
completed.
Before disconnecting, make sure that the status has
changed to READY on the iAUDIO LCD.
We recommend running ‘Safely Remove Hard-
ware’ wizard before disconnecting USB cable.
Charging iAUDIO
iAUDIO can be charged with optional AC Adapter
or by connecting to PC with USB cable.
Connect the AC Adapter to iAUDIO as in the figure
on the left. If iAUDIO was OFF when the AC adapter
is connected, LCD displays figure A while charging,
and figure B when the charge is completed.
A. During charging B. Completion of charging