beautypg.com

Other functions, Jvc tv remote control, Changing display information – JVC HR-J6009UM EN User Manual

Page 11: Blue back — on/off, 12 3 separate audio program (sap), Listening to sap, Stereo recording and playback

background image

Press MENU on the Remote.
Press SET –/+ to select “SAP”
option.

Press ENTER to select “ON”
position.

Press MENU to return to
normal screen.

Other Functions

Changing display information

Each time you press DISPLAY, the display
panel shows the time counter and the clock
time alternatively.
• When DISPLAY on the Remote is pressed,

time counter will appear on the TV screen.
To reset the time counter, press C. RESET on the Remote.

BLUE BACK — ON/OFF

When this function is set to “ON”, the TV screen becomes all
blue in the following case:
When receiving a channel not in use.

Press MENU on the remote. Press SET –/+ to select
“NO NOISE BACKGROUND”.

Press ENTER to select “ON”.

Press MENU to return to normal screen.

1

2
3

SEPARATE AUDIO PROGRAM (SAP)

When the VCR is turned on or a channel selection is made,
make certain "SAP" appears on the screen.
This means that the "Separate Audio Program" broadcast-
ing is available.

STEREO SAP

SAP

OR

LISTENING TO SAP

Your VCR is fitted with an SAP broadcast system which
enables you to switch to a SEPARATE AUDIO PROGRAM
when viewing a selected channel.
This function applies only when the program is
broadcast in multi-languages through the SAP broadcast
system.

When a TV is connected with an audio/video cable, turn the
TV and this VCR on, and select the video input mode the TV.

+/–/ENTER/MENU

MENU

CLOCK SET

TIMER REC SET

ON

OFF

ON

OFF

AUTO REPEAT

CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE

ON OFF

NO NOISE BACKGROUND

+/–/ENTER/MENU

MENU

CLOCK SET

TIMER REC SET

ON

OFF

ON

OFF

AUTO REPEAT

CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE

ON OFF

NO NOISE BACKGROUND

STEREO RECORDING AND PLAYBACK

When a MTS STEREO broadcast is
received, the STEREO will appear on
the screen and the program can be
viewed or recorded in stereo.
The Hi-Fi STEREO recording proce-
dure is the same as for normal
recordings.

NOTE:

When using a CATV system, stereo TV programs may
be transmitted over a mono cable channel. In this case
the word "STEREO" will not appear and the sound will
be in mono.

OUTPUT SELECTION

The VHS Hi-Fi audio system permits high fidelity recording
of MTS STEREO TV broadcasts.

When viewing an MTS STEREO TV program, or playing a
prerecorded VHS Hi-Fi STEREO videotape, press A.MONITOR
to select how the audio will be heard through the speakers.
Normally set to the Hi-Fi STEREO position, this button can be
set to the MONO position if the stereo broadcast or videotape
audio is of poor quality. The "R" and "L" positions allow the
audio from the Right or Left Hi-Fi channel to be heard over
both TV speakers. This button has no effect when viewing a
MONO videotape or TV program. Each time when you press
the button, OUTPUT SELECTION display appears on the screen
for several seconds. Refer to the chart below.

RECORDING STEREO BROADCASTS

STEREO

NOTES: •

When playing back a tape that is not recorded in

Hi-Fi stereo mode, the audio will automatically be
monaural.

When listening to a VHS Hi-Fi video tape or MTS

broadcast through the VHF/UHF jack (Audio/
Video cord not connected), the sound will be
monaural.

OUTPUT
SELECTION

STEREO
L ch
R ch
MONO

SOUND HEARD ON BOTH
SPEAKERS

STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO

1

2

3

JVC TV Remote Control

This Remote can control some functions (TV POWER,
INPUT

, TV CH –/+ and TV VOL –/+) of a remote

controllable JVC TV without setting.

NOTE:

• It’s not possible to operate a unit not equipped with a

remote sensor.

• This Remote can control a JVC TV only.

4F22001AE 08-Back

16/01/2002, 19:07

11