Jonsered CS 2117 EL - Manual (Page 3)

E
N
G
L
IS
H
2
Symbols 1
Important! Read before using chain saw 1
Contents 2
EC declaration of conformity 2
Technical specifications 3
Chain saw parts 4
Safe use 4
Starting and stopping 6
Daily inspection and maintenance 6
Kickback prevention 7
Chain brake with kickback guard 8
- Kickback guard inspection 8
- Manual chain brake function check 8
- Inertia chain brake function check 8
Mounting guide bar and adjusting chain 9
Chain catcher 10
Right hand guard 10
CONTENTS
Slip clutch 1700W 10
Electronic overload protection 2000W 10
Cutting equipment 10
Chain and guide bar lubrication 11
- Chain oil 11
- Filling chain oil 11
- Checking automatic 11
chain lubrication system
- Checking chain wear
11
Filing chain 12
Limbing 12
Crosscutting 13
Felling operations 13
- Danger zone 14
- Felling direction 14
- Clearing branches/Line of retreat 14
- Felling 14
Electrolux Motor AS, N-1708 Sarpsborg, Norway hereby declares that the following chain saws:
Jonsered CS 2117EL and Jonsered CS 2121EL, with serial numbers starting at 44900001 and onwards,
- are manufactured in compliance with EC Directive 98/37/EC (Machinery),
EC Directive 73/23/EEC including amendments (Low Voltage Directive), EC Directive 89/336/EEC including amendments
(Electromagnetic Compatibility Directive), and Directive 2000/14/EC (Noise Emission in the environment by equipment for
use outdoors)
- are manufactured in compliance with the following harmonized standards: EN 50144-1, EN 50144-2-13, IEC 60745-1
and IEC 60745-2-13.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has:
- carried out the EC type examination in accordance with the machinery Directive (98/37/EC) Article 8(2)(c)
- issued EC type examination certificates
No. 404/04/1038 - Jonsered CS 2117EL and 404/04/1037 - Jonsered CS
2121EL pursuant to machinery Directive 98/37/EC, Annex IV (4)
The chain saw submitted is identical to the samples submitted for EC type examination.
The measured and guaranteed sound power levels in accordance with Directive 2000/14/EC are set forth
under Technical Data in the User’s Manual.
Sarpsborg, 1th of November 2004
--------------------
Jan Hansen, President
EC DECLARATION OF CONFORMITY