Jbl es series speaker systems, Specifications – JBL ES150P User Manual
Page 2
Harman Consumer Group, Inc.
2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA
www.jbl.com
© 2007 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated,
registered in the United States and/or other countries. PolyPlas is a trademark of Harman International Industries, Incorporated.
Features, specifications and appearance are subject to change without notice.
Specifications
Frequency response: 27Hz – 150Hz
Amplifier RMS power: 300W
Amplifier peak dynamic power*: 500W
Crossover frequency: 50Hz – 150Hz; 24dB/octave, continuously variable
Driver: 250mm (10") PolyPlas
Dimensions with grille (H x W x D): 457mm x 337mm x 387mm (18" x 13-1/4" x 15-1/4")
Weight per speaker: 17.7kg (39 lb)
* The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measuredacross the output of a resistive load equal
to minimum impedance of thetransducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
JBL ES Series Speaker Systems
ES150P