Jacuzzi Bellavista Y875 - RH - Manual (Page 2)

Bellavista
™
5.5
pure air® ii Bath
technical Specifications
DimenSionS
66” L x 42” W x 26” H
(1676 mm) L x (1067 mm) W x (660 mm) H
Drain/overflow
A: 18-1/2” (470 mm) B: 9” (229 mm)
Cutout
Template Provided P/N P187000
total weight
763 lb (346 kg) / 51 lb/sq. ft. (249 kg/m
2 )
operating gallonage
85 U.S. Gal. (386 Liters)
proDuCt weight
105 lb (48 kg)
Skirt mounting
Optional U-Frame
eleCtriCal SpeCifiCationS
requires a dedicated gfCi protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
heater
No water heater is available on this unit. Blower has integral air heater.
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR05000 10/07
Y875
Bellavista™ 5.5 Pure Air® II Bath, Right Hand
(Includes a required drain/actuator kit in chrome)
• Center Drain Location
• Accessories / Hardware:
Trim Kit Rotary: #BN21
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
10"
35-1/2"
11-3/4"
6"
30-1/8"
18" x 4"*
3"
42"
66"
Blower
12" H x 18" L
Service Access
Optional Service Access
END VIEW
H
W
SIDE VIEW
L
2"
(51 mm) (Blower)
DRAIN/OVERFLOW
A
B
product Shown: Bellavista™ 5.5 pure air ii™ Bath
left hand Shown: model: Y875
* Measurements inside unit represent cutout in floor
to allow for drain/overflow.
Minimum Service Access dimensions given.