John Lewis U29492 JLBIIH603 - Manual (Page 12)

12
Residual heat indicator
1
Warning! Risk of burns from residual heat. After
being switched off, the cooking zones need some
time to cool down. Look at the residual heat indica-
tor
.
3
Residual heat can be used for melting and keeping
food warm.
The induction cooking zones create the heat required
for cooking directly in the base of the cookware. The glass
ceramic is merely heated by the residual heat of the cook-
ware.
The cooling fan switches itself on and off depending upon
the temperature of the electronics.
3
Use the induction cooking zones with suitable cook-
ware.
Switching the appliance on and off
3
After switching on, within approx. 10 seconds a heat
setting or a function must be set, otherwise the ap-
pliance automatically switches itself off.
Selecting the heat setting
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sen-
sor field, can be locked at any time in order to prevent the
settings being changed e.g. by wiping over the panel with a
cloth.
3
When you switch the appliance off, the locking func-
tion is automatically switched off.
Control panel Display Pilot light
Switch on Touch for 2 seconds / lights up
Switch off Touch for 1 second / none goes out
Control panel Display
Increase Touch to /
Decrease Touch to
Switch off Touch and at the same time
Control panel Display
Switch on Touch (for 5 seconds)
Switch off Touch previously set heat setting