JVC UX-M3R - Manual (Page 18)

– 15 –
Playing Back Tapes
• Use only type I normal tapes.
The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchroller and
the capstan.
Loading a Tape
1 Press
0 EJECT to open the
tape deck door.
2 Insert a recorded tape with the open side
down and playback side facing out from the
unit.
3 Close the tape deck door.
The TAPE indicator appears on the display.
Tape Playback
1 When the unit is turned on,
press TAPE.
2 Press
6.
Playback starts.
“PLAY” and the
3 indicator appear
on the display.
3 To stop playback, press
7.
To interrupt playback
Press
6.
The 3 indicator starts blinking and
“PAUSE” appears on the display.
To resume playback, press 6 again.
Rewind/Fast Forward
1 Press
4 or ¢ to rewind
or fast forward the tape.
“REW” or “FF” appears on the
display.
2 Press
7 to stop rewinding or
fast forwarding.
• The tape stops automatically at the end of the rewinding or
fast forwarding.
EJECT
TAPE
PLAY/PAUSE
STOP/CLEAR
PLAY/PAUSE
SEARCH/TUNING
STOP/CLEAR
02_01_21_UXM3R_A_En.p65 02.1.21, 7:24 PM 15