JVC HR-J259EE - Manual (Page 34)

34
EN
1 2 3
4 5 6
7 8 9
0
2
4
1
3
TUNER SET (cont.)
MENU
PUSH JOG
OK
Storing Channels Manually
Store channels that were not stored during Auto Set Up (
੬
pg. 6)
or Auto Channel Set (
੬
pg. 32).
SELECT BAND
4
Press PUSH JOG %fi to
change the band between
CH (regular) and CC
(cable), then press PUSH
JOG .
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
● Input "0" before any single number entries.
● To input the registered station name (ID – ੬
pg. 38),
press PUSH JOG until "– – – –" (ID setting) begins
blinking, then press PUSH JOG
%fi.
● For fine tuning adjustment, press PUSH JOG until
"+/–" begins blinking, then press PUSH JOG
%fi.
While tuning, “+” or “–” appears.
● To select the appropriate TV system, press PUSH JOG
until TV system setting (B/G or D/K) blinks, then
press PUSH JOG
%fi. Refer to the table below.
ENTER NEW CHANNEL
INFORMATION
6
Press OK and the Channel List screen appears.
● Repeat steps 3 through 6 as necessary.
CLOSE CHANNEL LIST
SCREEN
7
Press MENU.
● To change positions, see "Change Station Channel
Position" (
੬
pg. 35).
● If you wish to set station names other than the ones
registered in your recorder,
੬
"Set Stations (B)" on
page 37.
%
PR CH ID PR CH ID
01 25 – – – – 07 C33 – – – –
02 CDB – – – – 08 C26 – – – –
03 10 – – – – 09 55 – – – –
04 C65 – – – – 10 C24 – – – –
05 C31 – – – – 11 C23 – – – –
06 C32 – – – – 12 – – – –
[ 5∞]
= : EDIT
= [CANCEL] : DELETE
[MENU] : EXIT
TV
PR CH ID FINE SYSTEM
12 CH01 – –␣ – – +/– D/K
[ 5∞] : SELECT
[ ] : CURSOR +=
: OK
[MENU] : EXIT
∞ ∞
%
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CHANNEL LIST
SCREEN
2
Press PUSH JOG %fi to place the pointer next to
“MANUAL CH SET”, then press OK or PUSH JOG .
The Channel List screen appears.
SELECT POSITION
3
Press PUSH JOG %fi
until an open position in
which you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
%
(Ex.) To store in position 12.
%
%
Major Countries TV System
Austria, Denmark, Finland, Holland,
Italy, Norway, Spain, Switzerland,
B/G
Sweden, Germany, Egypt
China, Mongolia, Rumania, Bulgaria,
Czech Rep., Slovakia, Hungary, Poland,
D/K
Russia
NUMBER
CANCEL