JVC SP-UXM5 - Manual (Page 20)

– 17 –
Using Sleep Timer
With the sleep timer, you can fall asleep to music.
You can set the sleep timer using the remote control when the
unit is turned on.
How the sleep timer actually works
The unit automatically turns off after the specified time
length passes.
1 Press and hold SLEEP on
the remote control until the
desired time length appears
on the display.
The time length changes from 90 to 10 minutes in
10-minute steps.
2 Wait for a moment after specifying the time
length.
The SLEEP indicator lights up steadily on the display.
• Setting both the timer-off and sleep-off times causes the
unit to enter standby mode when the earlier one of them is
reached.
To change the shut-off time, repeat the procedure above.
To cancel the setting, press SLEEP so that the SLEEP
indicator goes off.
• The sleep timer is also cancelled when you turn off the
unit.
SLEEP
02_01_21_UXM5R_B_En.p65 5/22/02, 7:42 PM 17