JVC KD-G502 - Manual (Page 23)

23
Refer also to “CD OPERATIONS” on pages
18 to 21.
Playing an MP3 disc
1
Open the control panel.
Note on One-Touch Operation:
When a disc is already in the loading slot,
pressing CD CD-CH turns on the unit and starts
playback automatically.
2
Insert an MP3 disc into the loading
slot.
The unit turns on,
draws the disc and
starts playback
automatically.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
MP3 OPERATIONS
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appears. (See also page 24.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
Ex.: When the disc contains 19 folders
and 144 MP3 files
The display changes to show the following:
Current source indication
MP3 indicator
Total file
number Total folder
number
CD indicator
EN23-26_KD-G502[B]1.p65 22/6/04, 11:15 AM 23