Jacuzzi Duetta DZ20 - Manual (Page 2)

Technical Specifications
DimenSionS
66” L x 36” W x 26” H
(1676 mm) L x (914 mm) W x (660 mm) H
Drain/overflow
A: 18.4” (467 mm) B: 11” (279 mm)
CuTouT
Template Provided Part Number: DA08000
ToTal weighT
1028 lb (466 kg) / 62.3 lb/ft
2 (304 kg/m 2 )
operaTing gallonage
78 U.S. Gal. (295 Liters)
Max: 80 U.S. Gal (303 liters)
proDuCT weighT
160 lb (73 kg)
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
heaTer (STanDarD)
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N BN60000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR38000 01/08
Duetta
™
6636
Salon ™ Spa
DZ20
Duetta™ 6636 Salon™ Spa with Chromatherapy —
Right Hand
• Center Drain Location
• Accessories / Hardware:
TheraPro Jet Rings Kit: #D095
Sch 40, Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
11.04"
66"
36"
33"
3.84"
13" x 4" 2" Motor
Heater
12" H x 24"
L
Service Access
Blower
END VIEW
26"
36"
SIDE VIEW
66" 1/2"
(13 mm)
(Motor)
(Inlet Heater)
(Blower)
DRAIN/OVERFLOW
A
B
product Shown: Duetta™ 6636 Salon™ Spa
right hand Shown model: DZ20
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.