Jacuzzi Milano H547 - Manual (Page 2)

Milano™ Whirlpool Bath
Model: H546, H547
Milano™ Bath
Model: H548
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
H546 Milano™ Whirlpool Bath
Left Hand
H547 Milano™ Whirlpool Bath
Right Hand
H548 Milano™ Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
Trim Kit: 2 BMH Jet Rings #J869
Trim kit: 4 HTC Jet Rings #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 40” W x 20-3/4” H
(1829 mm) L x (1016 mm) W x (527 mm) H
Drain/Overflow
A: 18-1/2” (470 mm) B: 11” (279 mm)
Cutout
Template Provided Part Number #P188000
Total Weight
H546, H547: 893 lb (405 kg) / 45 lb/sq. ft. (218 kg/m 2 )
H548: 868 lb (394 kg) / 43 lb/sq. ft. (212 kg/m 2 )
Operating Gallonage
60 U.S. Gal. (227 Liters)
Product Weight
H546, H547: 143 lb (65 kg)
H548: 118 lb (54 kg)
Skirt Mounting
Not Available
Electrical Specifications Models H546, H547 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models H546, H547 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
20"
2"
11"
71-1/2"
40"
12" x 4"*
5"
Motor
12" H x 18"
L
Service Access
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR67 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Milano™ Whirlpool Bath Left Hand Shown Model: H546
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.