JBL S412P - Manual (Page 8)

JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
800-336-4JBL (4525) (USA only)
www.jbl.com
©1999 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
Part No. S412P O/G
T W E E T E R T Y P E : Pure-titanium dome with EOS™ waveguide
D E S I G N G O A L : Bring the thrill of live performance and movie sound to
the home environment by calling on JBL’s professional engineering leadership.
C R O S S O V E R N E T W O R K : Straight-Line Signal Path™ (SSP)
W O O F E R T Y P E : Cast-aluminum basket with HeatScape™ motor structure
P O R T D E S I G N : FreeFlow™ flared
P R O F E S S I O N A L R E F E R E N C E : Studio Monitor
O W N E R ’ S G U I D E
P R O S O U N D
C O M E S H O M E
™
P R O D U C T L I N E : STUDIO SERIES
M O D E L S412P
N U M B E R :
S P E C I F I C A T I O N S
Maximum Recommended Amplifier Power*: 250W
Powered Subwoofer Amplifier Output: 200W
Nominal Impedance: 8 Ohms
Sensitivity (2.83V/1m): 91dB
Frequency Response (–3dB): 32Hz – 20kHz
Crossover Frequencies: 200Hz, 850Hz, 3500Hz
High-Frequency Transducer: 1" Pure-titanium dome
Midrange Transducer: 4" PolyPlas™ cone
Midbass Transducer: 6" PolyPlas™ cone
Low-Frequency Transducer: 12" PolyPlas™ cone
Dimensions (H x W x D): 44" x 16" x 13-3/8" (1118mm x 406mm x 340mm)
Weight (per speaker): 86 lb (39.1 kg)
*The maximum recommended amplifier power rating will ensure proper system headroom to
allow for occasional peaks. We do not recommend sustained operation at these maximum
power levels.
Occasional refinements may be made to existing products without notice but will always meet
or exceed original specifications, unless otherwise stated.
**Trademark of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
S412P
Studio Series-S412P OM 10/19/99 1:00 PM Page 8