Jacuzzi Bellavista DY45 - Manual (Page 2)

Bellavista
™
5.5
salon® spa Bath
technical specifications
Dimensions
66” L x 42.22” W x 26” H
(1676 mm) L x (1072 mm) W x (660 mm) H
Drain/overflow
A: 20” (508 mm) B: 11-3/4” (298 mm)
Cutout
Template Provided P/N P187000
total weight
1186 lb (538 kg) / 62 lb/ft
2 (301 kg/m 2 )
operating gallonage
85 U.S. Gal. (322 Liters)
proDuCt weight
177 lb (80 kg)
skirt mounting
Not Available
eleCtriCal speCifiCations
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
heater (stanDarD)
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N BN60000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
installation notes
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
product shown: Bellavista™ 5.5 salon™ spa
right hand (DY45) shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
#FQ83000 10/07
DY45 Bellavista™ 5.5 Salon® Spa, Right Hand
• Center Drain Location
• Accessories / Hardware:
HTA Jet Ring Kit: #M952
BMH Jet Ring Kit: #J869
2 x Neck Jet Ring Trim Kit: #P556
Rotary Drain Kit, 30” Cable: #K606
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
10" 35-1/2"
11-3/4"
6"
30-1/8"
42"
66"
4" x 4" Motor
12" H x 24" L
Service Access
Heater
Blower
DRAIN/OVERFLOW
A
B
END VIEW SIDE VIEW
2"
66" 42"
26" (Heater)
(Motor)
(51 mm)
(Blower)