JVC CA-UXS59 - Manual (Page 13)

9
Listening to the Radio
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
To preset the stations
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
2 Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3
Select a preset number for the station you store.
• You can also use the PRESET UP/PRESET DOWN
buttons.
4 Store the station.
Remote control: Main unit:
MONO: Reception will improve though stereo
effect is lost. MONO indicator lights up.
STEREO: Normally select this. Stereo effect will
be resumed.
FM AM
1 sec. 1 sec.
DOWN UP
Remote
ONLY
FM MODE/
MP3 MONO
STEREO
Examples:
To select preset number 5, press
5.
To select preset number 15, press
+10, then 5.
To select preset number 30, press
+10, +10, then 10.
Remote
ONLY
SET
REC
1
4
7
10
2
5
8
3
6
9
10
SET
REC
4_Basic.fm Page 9 Wednesday, February 16, 2005 5:45 PM