Jabra BT3030 - Manual (Page 2)

2
L
1
3
4
5
3
Less Wire – More Music
Cut the wires and make your favorite music sound even better
with the Jabra HALO wireless headset. It connects easily to your
mobile phone through stereo Bluetooth and enables you
to stream music wirelessly. You can even make and take calls
wirelessly.
Use the corded option if your player of choice doesn’t support
Bluetooth Stereo/A2DP.
With Jabra HALO you can leave your phone in the pocket or in the
bag and control your music directly from the headset.
The design is as strikingly clear as your voice will be with the
Noise Blackout™ which eliminates unwanted background noise
to make your voice stand out during calls.
The Jabra HALO makes it easy to join the wireless revolution and
enables you to turn your mobile phone into your primary mobile
multimedia center – with less wire and more music.
Quick start guide
Charging your headset
Make sure that your Jabra HALO is fully charged before you start us-
ing it for the first time. While charging the indicator lights are solid,
from red, over yellow to green, when fully charged. Charging time is
approximately 2h. You can use the Jabra HALO during recharge.
Turning your headset on and off
Unfolding the headset will turn it on;
Folding the headset will turn it off
Pairing the headset with to a phone or other device
First time pairing
Unfold the headset and the Jabra HALO will automatically enter pair-
ing mode and search for a device.
Later pairing
Press and hold the Answer/End button (1) until the indicator light (5)
is solid blue (approximately 4 seconds). Activate Bluetooth on your
phone or other device and search for Bluetooth devices and select
Jabra HALO. Press “OK” on the phone or device and confirm with PIN
code 0000 (4 zeros)
Using your headset
Answer or end a call
Tap the Answer/End button (1) to receive / end calls
Adjust sound and volume*
Use the touch control (2) for turning volume up or down
Play or pause music
Tap the Answer/End button (1) to play / pause music
Change between music tracks*
Use the touch control (2) for next track (double tap on +) or previous
track (double tap on -)
Using your Jabra HALO with the 3.5mm music cable (not Bluetooth)
Insert the 3.5mm music cable to the micro-USB socket and connect
the 3.5mm jack into the device. Please note that the Bluetooth
features (including receiving calls) are disabled when using the Jabra
HALO with the cable. Using your Jabra HALO with the 3.5mm music
cable is not possible if the battery is completely discharged, so make
sure that it is at least partly charged.
Wearing style
Please note the left/right wearing indicators inside the headband.
Adapt the size of your Jabra HALO by extending the length of the
headband.
1) Answer/End or Play/
Pause button
2) Volume Control or Track
Change touch sensor
3) Hinges for folding of
headset
4) Jabra StatusDisplay TM :
Battery indicator
5) Jabra StatusDisplay
TM :
Bluetooth connectivity
indicator
* Device dependent