JVC CA-HXZ3 - Manual (Page 28)

– 23 –
English
Synchronized Recording
By using Synchronized Recording methods, you can start and
stop both disc play and tape recording at the same time.
Synchronized Recording consists of the following:
7 Direct Recording
7 Auto Edit Recording (only for audio CDs)
7 Direct Recording
Everything on the disc goes onto the tape in the order it is on
the disc, or according to the order you have made for
Program Play.
On the unit ONLY:
1
Press
0 EJECT and insert a recordable cassette
with the exposed part of the tape down.
2
Load a disc.
3
Select a disc.
For audio CDs:
Press the corresponding disc number
(CD1, CD2, or CD3) button where a
disc is loaded in step 2, then press
7.
For MP3 discs:
You can select a track to start recording with.
1) Press the corresponding disc number
(CD1, CD2, or CD3) button where a
disc is loaded in step 2.
2) Turn
4 / ¢ to select the group, then press CD 3¥8.
3) Turn
4 / ¢ to select the track.
REVERSE
MODE
CD3
CD2
CD1
CD REC
START
4
Press CD REC START.
“CD REC” appears on the display and the
REC (recording) lamp flashes when
recording starts.
The cassette deck starts recording while the
CD player starts playing.
When the recording is done, “CD REC FINISHED”
appears scrolling on the display, and the REC (recording)
lamp turns off. Both the cassette deck and the CD player
stop automatically.
To stop recording, press 7 to create a 4-second
blank portion on the recording tape. (Remember,
a 4-second blank is important when using Music
Scan—see page 21.)
To record on both sides—Reverse Mode
On the unit ONLY:
Press REVERSE MODE so that the Reverse Mode
indicator lights up on the display like—
.
• When using the Reverse Mode for Direct
Recording, start recording in the forward ( 3)
direction first. When the tape reaches its end while
recording a song in the forward direction (
3), the last song
will be re-recorded at the beginning of the reverse side ( 2).
If you start recording on the reverse side (
2) first,
recording will stop when only one side (reverse) of the tape
is recorded.
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up on the display like—
.
CD3
CD2
CD1
PRESET
CD
EN22-29.CA-HXZ3[UW]f.p65 6/7/02, 10:36 AM 23