Jura Capresso IMPRESSA XS90 - Manual (Page 26)

26
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ
TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ FILL WATER TANK /
RINSE WATER TANK
Thoroughly rinse out the water tank and fill it with fresh cold
tap water. Then place it back into the IMPRESSA.
Ⅲ
PRESS STEAM
Ⅲ Place a receptacle under the pivoting steam spout (23).
Ⅲ Press one of the Steam keys
.
Ⅲ MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
OPEN TAP
Ⅲ Place the receptacle under the hot water spout (25).
Ⅲ Turn the Hot Water key (22) to the symbol.
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
CLOSE TAP
Ⅲ Turn the Hot Water key (22) to the
symbol.
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ
TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ
SELECT PRODUCT
You can also trigger a decalcifying cycle manually at any
point in time (see Chapter 13.3).
18. Disposal
Please return the IMPRESSA to your local dealer, the service shop
or to JURA for proper disposal.
19. Tips for perfect coffee
Height-adjustable coffee spout (18)
You can adjust the height of the coffee spout to the size of your
cups.
Grinding degree
Refer to Chapter 2.5 “Adjusting the grinding gear”.
Preheating cups
The machine features a heatable cup shelf (19). You can, however,
additionally preheat the cups with hot water. The smaller the quan-
tity of coffee you make, the more important preheating is.
Sugar and cream
Stirring causes heat to be released. Adding refrigerated cream or
milk will reduce the temperature of the coffee significantly.