Jensen VM9114 - Manual (Page 11)

7
VM9114
3. Press the PIC button on the monitor (2) 1-3 times to exit the picture
adjustment menu.
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following protective
measurements can be executed to prevent damage to the mechanism or
monitor:
After the protective procedure is executed, normal operation is resumed by
pressing the OPEN button (1) or disconnecting and reconnecting the power.
Table 2: Monitor Protective Measures
Obstruction Self Protection
OPEN Button
Pressed
Power
Reconnected
Monitor loading
out horizontally Monitor is automati-
cally loaded into unit Monitor fully
extended horizon-
tally Monitor is automati-
cally loaded into unit
Monitor loading in
horizontally Unit stops at
obstruction point Monitor fully
extended horizon-
tally Monitor is automati-
cally loaded into unit
Monitor loading
out vertically Unit stops at
obstruction point Monitor swivels
back to the unit Monitor swivels
back to the unit
Monitor loading in
vertically Unit stops at
obstruction point Monitor swivels
back to the unit Monitor swivels
back to the unit