JVC Micro Component System UX-S10 - Manual (Page 22)

19
Recording Discs
—Disc Synchronized Recording
You can start disc play and recording at the same time.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
• See also page 17.
2
Close the cassette holder gently.
3
Press CD to select the CD player as
the source.
4
Press
‡ (recording).
The SYNC indicator appears on the display
and the CD starts playback automatically and
the recording starts.
• When the end of the tape is reached, recording stops and
the CD player is paused.
• If you press ‡ while playing back a track, the unit starts
playback and recording from the beginning of the track.
CD
You cannot press ‡ in the following cases:
• If no cassette is inserted.
• If a protected tape is inserted.
To stop recording for a moment, press *.
The recording is paused, but the CD playback
does not stop.
To resume recording, press
* again.
To stop recording, press &/).
The recording stops and the CD playback is
paused.
To remove the cassette, press
&/) while
recording is stopped.
Pressing DISPLAY/CLOCK SET does not show the time indication
while recording (“REC ON” appears on the display).
UX-S10[B]_C_10rec_f.p65 06.3.10, 5:18 PM 19