JBL GTO930 - Manual (Page 6)

06
Figure 4c.
Using Intermount II ™ in European and American 165mm
openings or custom-mounting the speaker as shown in
Figures 4c and 4d.
Figure 4d.
Note: If you are mounting the speakers behind the
factory door panel or grille, omit the grille and trim
ring. Place the U-shaped clips over the speaker’s
outside flange, align the hole in the clip with the notch
in the speaker’s basket and insert the screw through
the hole in the clip.
Hole
Cutout
Grille
Trim Ring
Grille Screen
Match Notch on
Speaker with Notch
on Trim Ring
Clips
Mounting Surface
Hole Cutout
Owners Manual 7/21/99 9:35 AM Page 7