John Lewis JLWM1407 - Manual (Page 18)

18
6. Select the spin speed or
“None” option
Press the “Spin” button repeatedly in order to select
the desired spin speed or the “None” option. The
relevant light will light up.
7. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option or the “Intensive”
option.
If your laundry has heavy stains and it is necessary to
prolong the washing time, select the “Stain” option.
The special detergent for stains (Stain remover) is
loaded from the compartment marked
.
If you wish the laundry to undergo an extra rinse,
select the “Extra Rinse” option.
If you do not want your laundry to be creased, select
the “Rinse hold” option to leave the fabrics in the
water of the last rinse.
The relevant light illuminates.
Rinse hold
Stain
Quick Extra rinse Intensive Prewash
1400
900
500
700
Spin
None
9. Select the “Delay start”
Before you start the programme, if you wish the
start to be delayed, press the “Delay Start” button
repeatedly, or keep it pressed, to select the desired
delay. The selected delay time value (up to 20 hours)
will appear on the display for 3 seconds, then the
duration of the programme will appear again.
10. Start the programme
Press the “Start/Pause” button. The relevant green
light will stop flashing.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme
or the selected delay.
11. How to change an option
or a programme during its
cycle
It is possible to change any option before the
programme carries it out. Before you make any change,
you must pause the washing machine by pressing the
“Start/Pause” button.
Changing a running programme is possible only by
resetting it.
Turn the programme selector dial to “Off” and then
to the new programme position. The washing water in
the tub will not empty out.
Start the new programme by depressing the
“Start/Pause” button.
Delay start
Wash time