John Lewis JLFZW1810 - Manual (Page 7)

7
Temperature regulation
The temperature may be regulated by pressing the
key B.
By pressing the key B the current temperature
setting flashes on the indicator.
To confirm the choice of temperature press the key
E. You will hear the buzzer for a few seconds and
the indicator displays the newly selected
temperature for a few seconds then shows the
interior temperature again.
The newly selected temperature will be reached
after 24 hours.
The temperature will remain stored even if the
appliance is not in use.
Attention!
Following first start up, the temperature displayed
can not correspond to the set temperature. During
this time it is possible that the temperature displayed
is different from the actual temperature.
Functions menu
The functions menu is accessed by pressing the key
D.
Each function can be confirmed by pressing button E.
If there is no confirmation after a few seconds the
display will go out from the menu and return to
normal condition.
The following functions are indicated:
Ambient Temperature
Child Lock function
Eco Mode function
Action Freeze function
Drinks Chill function
Ambient temperature
function
The ambient temperature function is activated by
pressing key D (several times if necessary) until the
corresponding icon appears .
In this condition the displayed temperature is the
ambient temperature.
You must confirm the choice by pressing key E
within few seconds.You will hear the buzzer and the
icon remains illuminated.
It is possible to de-activate the function at any time by
pressing key D until the corresponding icon flashes and
pressing key E.
Child lock function
The Child Lock function is activated by pressing key
D (several times if necessary) until the
corresponding icon appears .
You must confirm the choice by pressing key E
within a few seconds.You will hear the buzzer and
the icon remains illuminated.
When the Child Lock function is activated, the
programmed temperatures and settings remain, even
if any of the keys are pressed.
It is possible to de-activate the function at any time
by pressing key D until the corresponding icon
flashes and then pressing key E.
Eco mode function
The Eco Mode function is activated by pressing key
D (several times if necessary) until the
corresponding icon appears (or setting the
temperature at -18°C).
You must confirm the choice by pressing key E
within few seconds.You will hear the buzzer and the
icon remains illuminated.
In this condition the chosen temperatures are
automatically set (-18°C), in the best conditions for
storing food.
It is possible to de-activate the function at any time
by changing the selected temperature in the
compartment.
Action freeze function
The freezer compartment is suitable for long term
storage of commercially frozen and deep-frozen
food, and for freezing fresh food.
The maximum quantity of foods to freeze in 24
hours is shown on the rating plate.
To freeze the amount of food indicated on the rating
plate, place the food directly in touch with the
cooling surface (remove the drawer or basket).
In case the food is frozen inside the drawers or
baskets, the maximum quantity is slightly reduced.
To freeze fresh foods, you will need to activate the
Action Freeze function. Press key D (several times if
necessary) until the corresponding icon appears .
You must confirm the choice by pressing key E
within few seconds.You will hear the buzzer and
some animation with lines will appear on the display.
After a pre-cooling period of 24 hours, place the
foods in the freezer.
Place the food to be frozen in the compartment,
as this is the coldest point.
The freezing process takes 24 hours. During this
period do not put other foods in the freezer.