Volume/mute control and punch-through, Setting all volume/mute control to any one mode, Using your remote, cont – GE RM24926 User Manual

Page 14

Volume/Mute Control and Punch-Through

This remote lets you select which device Mode
controls your Volume/Mute buttons. The remote
is initially set for all device Modes to use their own
Volume/Mute control if present. If the programmed
code has no Volume/Mute operation of its own then
those buttons will punch-through control to the

Mode device without needing to change to

TV Mode.

Any Mode chosen for Volume/Mute control MUST

have its own Volume/Mute function or the Volume/

Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any

one Mode

This routine can set all Modes to “punch-
through” to any one chosen Mode for Volume/
Mute button control without the needing to
change to that Mode.
1. Press and hold the

CODE SEARCH button

until the red indicator turns on, then
release the button.

2. Press and hold the

MUTE button until the

red indicator blinks off, then release the
button.

3. Press and release the desired Mode button

(

TV, VCR, etc.) for Volume/Mute control, the

red indicator blinks then stays on.

4. Press and release the

MUTE button and the

red indicator turns off. The red indicator will
blink rapidly for three seconds if the Mode
you have selected has no Volume/Mute
control.

All other Modes will now punch-through to

your chosen Mode for Volume/Mute control.

Using Your Remote, cont.