JBL EONSUB-G2 - Manual (Page 6)

About the EON SUB G2
Applications
To supplement or extend the low frequency output of powered and non-powered full-range speaker
systems.
Features
• 15” Differential Drive ™ low-frequency driver with dual neodymium magnet for high power handling,
efficiency, and light weight.
• 250 watts actual power delivered to the drivers.
• Balanced loop-through output.
• Thermomaster
™ Total Thermal Management System ® . A single piece, cast-aluminum baffle
integrates the woofer frame, horn, and amplifier heat-sink. Air movement in the finned ports
dissipates heat – no internal or external cooling fans are required.
• Rugged, light weight, black co-polymer enclosure with cast aluminum baffle.
• Integral 35 mm pole mount receptacle with securing thumb screw.
• Extended low-frequency performance. Delivers powerful bass down to 40 Hz.
Technical Specifications
Freq. Range (-10 dB) 40 Hz – 200 Hz
Crossover Freq. 125 Hz
Maximum SPL 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D) 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)
Net Weight 19.5 kg (43 lbs.)
Driver Integral frame with one 15” (380 mm) driver,
dual neodymium magnet, 2” differential drive voice coil.
Electronic
Amplifier Rated Power
250 watts @ 2ohms, 0.1% THD
Input Type Balanced, differential
Maximum Input Level
Line Level In +28 dBu
Speaker Level In 120 VRMS, speaker level
Input Impedance
Line Level In 16 ohms line level
Speaker Level In 143 ohms speaker level
Audio Connectors
Line Level In XLR/F, balanced, line level
Speaker Level In 1/4” Phone, speaker level
Loop Output XLR/M, balanced, line level
Low Pass Filter 125 Hz Active, 3-pole
AC Input 110 – 230 VAC, selectable, 50 – 60 Hz, 203 watts rating per UL,
detachable IEC power cable.
Available Accessories
SS2-BK Tripod Stand
ESK15 Suspension Kit for EON 15” models (except EON1500)
BRK15 Bracket, adapts EON 15” models to OmniMount ® brackets
EON15 BAG-1 Zippered, plush-lined speaker bag with wheels for EON15” models
EON15 BAG/W-1 Zippered, plush-lined speaker bag for EON15” models
6