John Lewis JLTDC11 - Manual (Page 16)

4. Push down the unlock button on the large
mesh filter.
The large mesh filter pops up.
5. Take out fine filter.
6. Remove the fluff from fine filter. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The filter area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
8. Remove fluff from the entire filter area. It
is best to use a vacuum cleaner for this
purpose.
9. Press both journals of the large mesh filter
into the brackets on the loading door
until they snap into place.
10. Re-insert fine filter.
11. Press against the large mesh filter until it
locks into the interlock.
16