JVC Micro Component System UX-GB9DAB - Manual (Page 10)

7
Daily Operations
—Playback
1
Turn on the power.
The STANDBY lamp on the main unit turns off.
Without pressing STANDBY/ON ...
• The System turns on by pressing one of the source
buttons.
• The System turns on and activates the AUX source
by starting playback on an external device when
QP Link is activated. (See page 9 for details.)
2
Select the source.
Playback automatically starts if the selected source is
ready.
3
Adjust the volume.
4
Operate the target source as explained
later.
To turn off (standby) the unit
You can reduce power consumption by pressing DIMMER
to turn the display off while on standby.
• When the display is turned off, QP Link does not work. 2
1
3
4
STANDBY/ON
VOLUME
DAB FM AM
SET /ANT. P.
CANCEL
4,¢
FM MODE /
PLAY MODE
2
1
NUMBER
SELECT
QP LINK
DIMMER
3
PRESET /GROUP/PTY
DOWN,UP
PTY SEARCH
7
In this manual, the operations using the remote
control are explained mainly; however, you can use
the buttons and controls on the main unit if they have
the same (or similar) name and symbol.
The STANDBY lamp on the main unit lights
in red.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers.
Be sure to turn down the volume before
connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
STANDBY/ON
UX_GB9.book Page 7 Thursday, May 18, 2006 4:18 PM