Jwin JD-VD903 - Manual (Page 27)

26
3 Initial Settings
3-4 System Info Setup
-continued
SCREEN SAVER Setting
If you have set the screen saver ON by the following method then you may see it functioning in the stop mode. This
function will ONLY function in the stop mode.
1
Press
SETUP SETUP SETUP SETUP SETUP in the stop mode.
2
Press / to select “System Info” and press .
3
Press / to select “Screen Saver”, and then press .
4
Press / to select “ON” or “OFF” and press .
The waiting time of the screen saver is set to a certain time. When you are in the stop mode and have not operated the
DVD player over a certain time then the screen saver will appear automatically on the TV.
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
ANGLE MARK Setting[DVD]
You can choose to display or hide the angle mark “ ” on screen.
1
Press
SETUP in the stop mode.
2
Press / to select “System Info” and press .
3
Press / to select “Angle Mark”, and then press .
4
Press / to select “ON” or “OFF” and press .
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
NOTE:
Whether the ANGLE MARK is set to ON or OFF with this setting, when you press the
ANGLE button, this DVD Recorder
will still playback multi-angles that are available on the video discs.