About speaker grille, Specifications – JVC SX-WD5 User Manual
Page 4
4
English
Speaker grille
Projections
Holes
About Speaker Grille
The speaker grille is removable as illustrated below:
To remove the speaker grille, insert your fingers at the top of the speaker grille, then
pull towards you. Repeat the procedure at the bottom of the speaker grille.
To attach the speaker grille, put the projections of the speaker into the holes of the
speaker grille.
• Do not push the speaker grille strongly.
Specifications
Type:
2-way bass-reflex type
Magnetically-shielded type
Speakers
Mid and low range:
10.5 cm (4
3
/
16
in.) wooden cone
Tweeter:
2.0 cm (
13
/
16
in.) wooden dome
Power handling capacity: 100 W
Impedance:
6
Ω
Crossover frequency:
3 500 Hz
Frequency range:
55 Hz to 50 000 Hz
Sound pressure level:
82 dB/W•m
Dimensions (W x H x D):
143 mm x 257 mm x 243 mm
(5
11
/
16
in. x 10
1
/
8
in. x 9
5
/
8
in.)
Mass:
3.5 kg (7.81 lbs)
Supplied accessory:
Speaker cord (3 m) (1)
Design and specifications subject to change without notice.
EN_SX-WD5[J].p65
11/04/2005, 12:42 PM
4