JBL HTI88 - Manual (Page 5)

5
amplifier or your main receiver/
amplifier to power the HTI88,
select one of the two connec-
tion methods that follow.
Connection Method #1
Use this method when you are
using the HTI88 with your main
receiver/amplifier. Connect the
main left and right speaker-
level outputs on your receiver/
amplifier to the Input 1 (for left
channel) and Input 2 (for right
channel) connectors on the
HTI88 loudspeaker or connec-
tion panel. Connect the Output 1
terminals to the corresponding
terminals on your front left
speaker, and the Output 2 termi-
nals to the corresponding ter-
minals on your front right
speaker.
You may wish to mount the
HTI88 horizontally to preserve
the stereo image of the left and
right low frequencies.
The HTI88’s onboard cross-over
feeds the low-passed signal
(2nd order at 100Hz) to the
HTI88 subwoofers, and the
high-passed signal to the
speaker-level outputs for con-
nection to the satellite speak-
ers.
HTi88s
L 1
L 2
L 3
L 4
BLK
GRN
BLK
ORN
J 1
C 1
C 3
C 2
+ OUT 2 –
+ OUT 1 –
C 4
J 2
+ IN 2 –
+ IN 1 –
HTi88s
L 1
L 2
L 3
L 4
BLK
GRN
BLK
ORN
J 1
C 1
C 3
C 2
+ OUT 2 –
+ OUT 1 –
C 4
J 2
+ IN 2 –
+ IN 1 –
– + – +
Receiver/Amplifier Speaker Outputs
Left Right
– +
Front Left Speaker
– +
Front Right Speaker
Rear of Right HTI88 Rear of Left HTI88
Connection Method #1, Using Two HTI88 Loudspeakers (Use Shorting Straps)
– + – +
Receiver/Amplifier Speaker Outputs
Left Right
– +
Front Left Speaker
– +
Front Right Speaker
YEL/BLK YEL WHT/BLK WHT ORG/BLK ORG GRE/BLK GRE
INPUT 1 INPUT 2 OUTPUT 1 OUTPUT 2
– + – + – + – +
YEL/BLK YEL WHT/BLK WHT ORG/BLK ORG GRE/BLK GRE
INPUT 1 INPUT 2 OUTPUT 1 OUTPUT 2
– + – + – + – +
Connections Panel of
Left HTI88 Back Box
Connections Panel of
Right HTI88 Back Box
Connection Method #1, Using Two HTI88 Loudspeakers
With Back Boxes (Use Shorting Straps)
ENGLISH