JVC HR-A63U (Hi-Fi) - Manual (Page 11)

11
SELECT MODE
5
At the Override Auto Clock Set screen (
੬
pg. 10), move
the highlight bar (arrow) to “MANUAL CLOCK SET” by
pressing CH▲▼, then press OK.
SET DATE, TIME AND D.S.T.
6
The Manual Clock Set
screen is displayed and the
month digit begins
blinking. Press the
appropriate NUMBER keys
to set the date and time (if
only 1 digit, press "0" first).
Press CH▲▼ to set AM/
PM and D.S.T. (Daylight
Saving Time). Press OK after AM/PM and D.S.T.
settings.
Set D.S.T. to "ON" to set the D.S.T. according to the
VCR's clock or to "OFF" if D.S.T. doesn't apply to you.
When you’re finished with this set-up procedure, press
MENU to start the clock.
NOTES:
● CH ▲▼ can be used to perform all operations. (In this
case, press OK after each setting.)
● At the Manual Clock Set screen, the setting that can
be set blinks. When setting of a highlighted item is
completed, the highlight bar moves down by 1 line to
the next item.
MAKE CORRECTIONS
7
To change any of the settings, press OK or SEARCH
T Y
until the item you want to change blinks,
then set as in step 6.
Manual
SELECT TIME ZONE
8
You can select the zone
automatically or manually
by pressing CH▲▼. If an
incorrect time is displayed
you may be receiving the
clock setting data of a PBS
channel from an adjacent
time zone or from an
incorrect PBS channel
from a cable TV system. If you selected "AUTO" in step
7 select "MANUAL" and select the correct time zone
manually.
● If you selected "AUTO", press MENU to return to the
Semi-Auto Clock Set
screen.
● If you selected
"MANUAL", press OK
and the screen to the
right appears. Move the
highlight bar (arrow) to
your choice by pressing
CH▲▼, then press
MENU twice to return to the Semi-Auto Clock Set
screen.
SELECT D.S.T. MODE
9
You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.
Move the highlight bar (arrow) to your choice by
pressing CH
5∞, then press MENU and the Semi-Auto
Clock Set screen reappears.
IMPORTANT
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel when
the clock is being set. The current time will appear
automatically when the clock is set.
TIME ZONE SELECT
=AUTO
MANUAL
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END
MANUAL CLOCK SET
DATE 1/ 1/97 WED
TIME – –:– – AM
D.S.T. ON
PRESS NUMBER KEY (O–9)
OR ( 5,∞), THEN (OK)
PRESS (MENU) TO END
Auto
SELECT MODE
5
At the Override Auto Clock Set screen, move the
highlight bar (arrow) to "AUTO CLOCK SET" by
pressing CH▲▼, then power off the VCR. Do not
power it on again until the clock has been adjusted.
The clock is automatically adjusted on the hour except
at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The
clock will be adjusted on the hour based on the time
displayed on the VCR, not on the actual real time.)
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
TIME ZONE SELECT
=ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END
D.S.T. SELECT
=AUTO
ON
OFF
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END