Technical data, Installation, Positioning – John Lewis JLFFW2013 User Manual
Page 20: Location
Technical data
JLFFW1811
JLSS1814
JLFFW2013
JLSS2015
JLFFW2012
Dimension
Height
1850 mm
2010 mm
2010 mm
Width
595 mm
595 mm
595 mm
Depth
632 mm
632 mm
632 mm
Rising Time
16 h
16 h
16 h
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
Installation
Read the "Safety Information" carefully
for your safety and correct operation
of the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Location
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air can
circulate freely around the back of the cabinet.
To ensure best performance, if the appliance
is positioned below an overhanging wall unit,
the minimum distance between the top of the
cabinet and the wall unit must be at least 100
mm . Ideally, however, the appliance should
not be positioned below overhanging wall
units. Accurate levelling is ensured by one or
more adjustable feet at the base of the
cabinet.
20