beautypg.com

Pg. 25) – JVC GR-D250 User Manual

Page 25

background image

EN

25

MENUS FOR DETAILED ADJUSTMENT

MasterPage: Start_Right

ADV

A

N

C

ED

F

E

A

T

UR

ES

SYSTEM

The “s SYSTEM” functions which are set when
the Power Switch is set to “M” are also applied
when the Power Switch is set to “PLAY”.
[ ] = Factory-preset

OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (

੬ pg. 29)

[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect. (

੬ pg. 29)

OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
It is recommended that this function be set to
“OFF” to prevent improper operation.

OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Program AE with special effects, etc., and can
be used to confirm how these functions operate.
Demonstration starts in the following cases:

● When the Menu Screen is closed after “DEMO

MODE” is turned “ON”.

● With “DEMO MODE” set to “ON”, if there is no

operation for about 3 minutes after the Power
Switch is set to “A” or “M”.

● Performing any operation during the

demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.

NOTES:

● If a cassette is in the camcorder, the

demonstration cannot be turned on.

● “DEMO MODE” remains “ON” even if the

camcorder power is turned off.

● If “DEMO MODE” remains “ON”, some functions

will not be available. After viewing demo, set to
“OFF”.

[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.

EXECUTE: Resets all settings to the factory-
preset.
[RETURN]: Does not reset all settings to the
factory-preset.

BEEP

REMOTE

DEMO MODE

PRIORITY

CAM RESET

GR-D250EW.book Page 25 Wednesday, January 26, 2005 3:44 PM