beautypg.com

Basic playback features, Checking tape position, Playing back tape repeatedly – JVC HD-DH40000U User Manual

Page 22: Dc b, Basic playback and recording (cont.)

background image

22

EN

IN F-1

+

C

B

Basic
Playback
Features

Checking tape position

The tape position indicator
appears on the screen in the
following cases:

● When you change the VCR

operation mode from the
stop mode to fast forward
or rewind mode.

● When you perform an

Index Search (

੬ pg. 24).

The position of “ ” in relation to “B” (Beginning) or “E”
(End) shows you where you are on the tape.

NOTES:

“SUPERIMPOSE” must be set to “ON”, or the indicator will
not appear (

pg. 57).

It may take a few seconds for the tape position indicator to be
displayed.

To reset the time counter, press C. RESET on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.

Playing back tape repeatedly

— Repeat Playback

You can play back a tape repeatedly (50 times).

While playing back a tape, press and hold PLAY (

3 )

for more than 5 seconds.
The play indicator (

# ) on the front display panel starts

flashing slowly, and a tape will be played back 50 times.
To stop playback, press STOP (

7 ) on the Remote or

STOP/EJECT (

7

/

0 ) on the front panel.

NOTE:

For a cassette recorded in D-VHS mode, Repeat Playback is not
possible if the cassette was recorded in LS3 or LS5 mode.

B

BASIC PLAYBACK AND RECORDING (cont.)

A

B

E

● Turn on the VCR and the TV, and select the AV

mode on the TV.

● Set the VCR/TV/CABLE/DBS selector on the

Remote to “VCR”.

VCR

TV

CABLE

/DBS

D

C

B

Notes on playback in LS5 mode

The following conditions are product features and do not
indicate mechanical problems:
● After pressing PLAY ( 3 ), it may take approximately 20

seconds to start playback because the tape speed is five
times lower than that in STD mode.

● Automatic tracking function is activated at the beginning

of playback to reproduce clear pictures. As a result, still
picture may be displayed or motion pictures with block
noise may be appeared for approximately 2 minutes.

● When you perform High speed search in LS5 or LS3

mode, still picture may be displayed or motion pictures
with block noise may be appeared.

HM-DH40000U-EN21-33

5/8/3, 10:27 AM

22